El Dorado Hills Electrical Company serves homeowners, landlords, property managers, and businesses across El Dorado Hills with the full range of residential and commercial electrical work. From a dead outlet or a tripping breaker to a complete panel upgrade or a whole-home rewiring project, this is the number to call when the work needs to be done right. Panel and wiring work finished to code is the baseline, not the exception. Straight scheduling. Upfront pricing. Code-compliant wiring.
Open seven days a week from 7:30 AM to 8:30 PM.
Call (530) 461-5942 for a quote.
Every electrical issue has a starting point, and most of them are easier to diagnose than homeowners expect. Whether the problem is a burning smell near an outlet, a section of the house with no power, or a breaker that keeps tripping without an obvious cause, a diagnostic visit gets to the root of it before any repair work begins.
The calls we get most often involve dead outlets, breakers that trip and won't reset, flickering lights, and sparking or discolored outlet covers. Each of those symptoms points somewhere specific in the wiring, and the job is to find it. A diagnostic visit covers a visual inspection, circuit testing, and a clear explanation of what the fault is and what it takes to correct it before anything is scheduled. Reach out and describe what the breaker is doing.
Outlet work covers standard replacements, GFCI outlets in kitchens and bathrooms, AFCI outlets where the code requires them, USB combination outlets, and weatherproof outdoor receptacles. On the switch side, that includes dimmer installation, smart switch wiring, and straightforward light switch replacements. We also run dedicated 240-volt circuits for dryers, large appliances, and other high-draw equipment. Prompt response, even for last-minute electrical calls, keeps a small job from turning into a bigger problem.
Lighting work covers the full interior and exterior range: recessed can lights, pendant fixtures, chandeliers, under-cabinet lighting, landscape lighting, security lighting, and motion sensor lights. Ceiling fan installation includes new wiring where no existing switch box is present, as well as fan replacements and upgrades. Customers get a rate on the phone before anything is scheduled, so there are no open questions about cost going into the visit.
Every home's wiring tells a different story, and in El Dorado County the range is wide. A newer build in a planned community and a mid-century home near the older parts of El Dorado Hills can present completely different electrical systems, and both deserve a careful look before any work starts.
Panel upgrades cover the full scope: 200-amp service upgrades, main panel replacements, fuse box to breaker conversions, and subpanel installation for additions, garages, and outbuildings. Whole-home rewiring and partial rewiring address aging systems, knob-and-tube wiring, and aluminum branch circuit wiring that no longer meets current safety expectations. GFCI and AFCI protection, grounding and bonding, and arc-fault breaker installation all fall within this work.
Local permit rules decide which electrical jobs need an inspection, and that applies to panel work and rewiring projects in particular. We handle the scoping, the code requirements, and the documentation so the work meets the standard the next inspection expects.
The homes and wiring in this area have their own quirks, shaped by rapid growth, a climate that pushes air conditioning hard through summer, and a region where EV ownership and rooftop solar have moved well past the early-adopter stage. Wildfire-season public-safety power shutoffs are a real part of life in the foothills, and that changes what homeowners here need from their electrical systems. The three services below come up regularly in El Dorado Hills for exactly those reasons.
A Level 2 EV charger at home cuts overnight charging time dramatically compared to a standard wall outlet. The job starts with a panel capacity check to confirm the existing service can carry the added load, then a dedicated 240-volt circuit is run to the garage or parking area, and the charger is mounted and tested. The cost and what it covers are explained on the call before any visit is scheduled.
We handle the electrical side of solar and battery backup installations: the wiring, the dedicated circuits, the panel capacity assessment, and the interconnection work that ties a system into the home's existing service. A load calculation during the visit confirms whether the current panel can support the system or whether a service upgrade is the right first step. Give us a call and we will get the power back on when the next outage hits before it becomes a problem.
A whole-home surge protector installs at the panel and catches voltage spikes before they reach the wiring and devices throughout the house. In this part of California, grid fluctuations during high-demand summer periods and the abrupt power restoration that follows a wildfire-related shutoff both create the kind of surge that damages electronics, appliances, and HVAC equipment. The installation is straightforward and the protection it adds is immediate.
Kitchen and bathroom remodels, home additions, garage conversions, and accessory dwelling units all need an electrician at multiple stages of the project. New circuit installation, dedicated appliance circuits for refrigerators, dryers, and ovens, hardwired smoke detector and carbon monoxide detector installation, bathroom exhaust fan wiring, and attic fan circuits are all standard parts of that work.
For outdoor projects, pool electrical wiring and hot tub circuit installation are common requests in California's climate, and both require a dedicated circuit with the correct disconnect and GFCI protection. Backup generator hookups, transfer switch installation, and standby generator wiring round out the specialty side, giving the home a reliable path to power when the grid goes down.
The work area left as it was found is the standard on every job, whether that is a single outlet replacement or a full panel and circuit project. Electrical work to code. Clean panel work. Costs set out on the call.
Calling an electrician doesn't have to be stressful, and the first call is the place to get the questions answered. Customers ask about the cost of a panel upgrade, what EV charger installation runs, how much it costs to rewire a house, or what a ceiling fan installation typically involves. Those questions have real answers, and the price is confirmed on the call before anything is put on the schedule.
The person who answers the call knows the trade and can scope the job based on what you describe. That conversation sets the price, covers what the visit includes, and gives you what you need to decide whether to move forward. One call is enough to get the visit booked.
El Dorado Hills is the primary service area, with regular work across El Dorado County. Nearby communities served include Folsom, Shingle Springs, Cameron Park, Rescue, Granite Bay, and Rancho Cordova. Residential and commercial customers across the area are covered, from single-family homes and rental properties to office buildings and commercial tenant spaces.
We handle the full range of residential and commercial electrical work: repairs and troubleshooting, outlet and switch installation, lighting, ceiling fans, panel upgrades, wiring and rewiring, dedicated circuits, EV charger installation, whole-home surge protection, backup generator hookups, and electrical safety inspections.
If the job involves the electrical system in a home or commercial property in El Dorado Hills or the surrounding area, call (530) 461-5942 and we will scope it on the call.
Call (530) 461-5942 and describe the job.
We go through what the work involves, what it will take to complete it, and what it costs before anything is scheduled. The price is confirmed on the call, not at the end of a visit.
Flickering lights, a breaker that keeps tripping, a warm or discolored outlet cover, a burning smell near a panel or receptacle, and sparking at an outlet are all symptoms that should not wait. Each one points somewhere specific in the wiring, and a diagnostic visit finds the source before any repair begins.
Call (530) 461-5942 and describe what you are seeing.
Half a house losing power at once usually traces back to a tripped double-pole breaker or a problem at the service entrance. Check the panel first and see whether a breaker has moved to the middle position. If resetting it does not restore power, or if the breaker trips again immediately, call us rather than continuing to reset it.
A kitchen circuit that trips repeatedly is usually carrying more load than it was designed for, or there is a fault somewhere on the circuit. Modern kitchens often need dedicated circuits for the refrigerator, microwave, and countertop appliances. We can assess what the circuit is doing and whether a dedicated circuit or panel work is the right fix.
The price we give on the call is based on what you describe, and it covers the scope as we understand it at that point. If the job turns out to be more involved once we are on site, we explain why before the work changes. Nothing is added to the scope without your knowledge first.
Pricing depends on the specific work: which circuit is involved, what the panel can support, and how much access the wiring requires. A larger home does not automatically mean a higher cost, but a job that requires running wire through finished walls or upgrading a panel to support new circuits will take more work than a straightforward outlet replacement.
Wiring that runs through finished walls or ceilings, a panel that needs an upgrade before a new circuit can be added, and older wiring that requires remediation rather than a simple repair can all affect the total. We go through the factors on the call so you know what to expect before the visit is scheduled.
Homes in El Dorado Hills with knob-and-tube wiring, aluminum branch-circuit wiring, or ungrounded two-prong outlets throughout are good candidates for an inspection. A two-prong outlet in every room, a fuse box instead of a breaker panel, or lights that dim when an appliance kicks on are all signs worth having looked at. An inspection identifies what is present and what it would take to bring the system up to current standards.
If you're not sure your panel can handle the load, or if there is a repair, installation, or project anywhere in the electrical system that needs attention, this is the call to make. El Dorado Hills Electrical Company handles the full range of residential and commercial electrical work, from a single outlet to a service upgrade and everything in between. Reach us seven days a week from 7:30 AM to 8:30 PM.
Call (530) 461-5942 and we'll get the current flowing right.
We handle electrical work across the board, from a single dead outlet to a full panel replacement or new circuit for an EV charger. The table below breaks down what each service covers, who it fits best, and a practical note to help you decide what to ask about when you call. Pricing is confirmed on the call before anything is scheduled.
| Service | What It Covers | When You Need It | Good to Know |
|---|---|---|---|
| Hot-Tub Circuits |
| Homeowners installing a new hot tub or replacing an existing one | Hot-tub wiring requires a GFCI-protected disconnect within sight of the unit and a dedicated circuit sized to the manufacturer's specifications. |
| Electrical Panel & Service UpgradesMost Popular |
| Homes with an undersized panel, a fuse box, or plans to add EV charging or battery storage | A load calculation before the upgrade confirms the new panel is sized for what the home actually draws, not just the minimum code allows. |
| Lighting Installation |
| Homeowners upgrading indoor fixtures or adding outdoor security lighting | In the El Dorado Hills foothills, exterior lighting on longer driveways and around outbuildings is both practical and commonly requested. |
| Dedicated Appliance Circuits |
| Homes adding a new appliance or experiencing repeated trips on a shared circuit | High-draw appliances each require their own breaker and circuit. Running them on a shared circuit is the most common cause of repeated kitchen and laundry breaker trips. |
| Ceiling Fan Installation |
| Any room where a fan is being added or swapped out | A standard junction box is not rated for a ceiling fan's weight and movement. We confirm the correct support is in place before the fan goes up. |
| EV Charger Installation |
| EV owners who want reliable home charging rather than a standard wall outlet | We check panel capacity before running the circuit. If the panel needs an upgrade to support the charger, we scope that as part of the same conversation. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or tenant with an unexplained electrical fault | We trace the fault to its source before recommending any repair, so you know exactly what the fix involves. |
| Wiring & Circuit Installation |
| Older homes with aging wiring or any property adding new circuits | Aluminum branch-circuit wiring from the 1960s and 1970s requires specific remediation methods, not a standard repair. We assess the wiring type before recommending an approach. |
| Electrical Safety Inspections |
| Homebuyers, sellers, and landlords preparing a property for occupancy or sale | A pre-purchase inspection can surface panel issues and missing safety devices that a general home inspector may not catch. |
| Outlet & Switch Installation |
| Kitchens, bathrooms, garages, and outdoor areas requiring code-required protection | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Missing protection is a common finding on older properties. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics or properties in areas prone to grid switching events | In El Dorado Hills, voltage spikes from wildfire-season shutoffs and abrupt power restoration are a real and recurring source of appliance and electronics damage. |
| Solar & Battery Backup |
| Homeowners adding battery backup in response to wildfire-season power shutoffs | We handle the electrical side only: the wiring, interconnection, and panel work. The panels and storage unit are installed by the solar contractor. |
| Standby Battery for Outages |
| Homeowners who want selected circuits to stay live during a grid outage | The transfer switch is what prevents backfeed to the grid and allows the generator or battery to carry selected circuits safely. We handle the wiring and panel connection. |
| Breaker & Fuse Repair |
| Homes where a single circuit keeps failing or a fuse blows repeatedly | A breaker that trips immediately on reset often points to a wiring fault, not just a worn breaker. We check both before replacing anything. |
Call (530) 461-5942 to describe the job and get a straight answer about what it involves and what it will cost.
(530) 461-5942