El Dorado Hills Electrical Company handles electrical repairs, panel work, wiring, and code-compliant installation for homes and businesses throughout the area. We work with homeowners, landlords, property managers, and commercial tenants - whatever the job, we scope it on the call and get it scheduled. We are open seven days a week, 7:30 AM to 8:30 PM.
Straight scheduling. Upfront pricing. Code-compliant wiring.
Call (530) 461-5942 to get a quote for any electrical job in El Dorado Hills.
Every home's wiring tells a different story, and the symptoms that send people searching for an electrician tend to follow a familiar pattern: outlets that stopped working, lights that flicker when the refrigerator kicks on, a breaker that trips the moment you run two appliances at once, or a warm outlet that has no business being warm. We troubleshoot all of it.
On the residential side, that means tracing the fault back to the source - whether it is a failed GFCI outlet that has knocked out a chain of receptacles, a loose connection behind a switch, an arc-fault breaker that keeps nuisance-tripping, or a grounding issue that is making the whole circuit unreliable. We explain the fault before any work starts, so you know what you are paying for and why.
Commercial jobs follow the same diagnostic approach. Office electrical faults, retail circuit problems, and multi-tenant building repairs all get the same attention to the root cause rather than a surface fix. Prompt response, even for last-minute electrical calls, is part of how we work.
Reach out and describe what the breaker is doing.
If you're not sure your panel can handle the load, that uncertainty is worth taking seriously. An undersized panel trips breakers under normal use, limits what you can add to the home, and can create conditions that a code inspection will flag. We handle panel replacements, 200-amp service upgrades, and subpanel installations for both residential and commercial properties.
Fuse box replacement is a common request in older El Dorado Hills homes. A fuse box that has been in place for decades was not designed for today's appliance loads, and swapping it for a modern breaker panel brings the service entrance up to current standards. We run the load calculation before the work starts so the new panel is sized correctly for what the home actually draws.
Property managers and landlords often need panel upgrades to meet rental housing requirements or to support tenant improvements. We handle commercial panel work alongside residential, and the process is the same: scope the job, confirm the rate, schedule the work. Panel and wiring work finished to code is the standard we hold every job to.
Give us a call and we will get the power back on.
Calling an electrician doesn't have to be stressful, and most of the jobs in this category are straightforward once the problem is properly identified. We cover outlet and switch work, lighting installation, ceiling fans, and wiring across the board.
A dead outlet is often a tripped GFCI somewhere upstream - but it can also be a failed device, a loose wire, or a wiring fault that needs tracing. We install and replace standard outlets, GFCI outlets, AFCI-protected circuits, and dimmer switches. Ceiling fan installation and replacement falls in this category too: proper wiring at the box, correct support for the fan's weight, and a clean finish.
A hot light switch or a switch that buzzes when it dims is worth having looked at. Those symptoms point to either a failing device or a load the circuit was not designed for.
Recessed lighting installation, light fixture replacement, exterior security lighting, motion sensor lights, and landscape lighting wiring all fall under what we handle. In El Dorado Hills, exterior lighting serves a real security function given the foothill terrain and longer driveways common in the area. We run the wiring, install the fixtures, and confirm everything is on a circuit sized for the load.
Indoor lighting upgrades - swapping older fixtures for LED recessed lights, adding under-cabinet lighting, or wiring a new fixture where none existed - are jobs we schedule regularly.
Partial rewires, full home rewiring, aluminum-wiring remediation, and knob-and-tube replacement are all work we take on. Older homes in El Dorado County occasionally surface aluminum branch-circuit wiring from the 1960s and 1970s, which requires specific remediation rather than a standard repair. Knob-and-tube wiring presents its own set of concerns and is typically replaced rather than extended. The work area left as it was found is how we approach every wiring job.
One call is enough to get the visit booked.
The homes and wiring in this area have their own quirks, and one of the most common is a kitchen or laundry circuit that was never meant to carry a modern appliance load. A dryer, electric range, refrigerator, or chest freezer each draws enough current to warrant its own dedicated circuit. Running a high-draw appliance on a shared circuit is what causes the repeated breaker trips and the performance issues that follow.
We install dedicated 240-volt and 120-volt circuits for dryers, ranges, wall ovens, refrigerators, and other appliances that the code requires to run on their own breaker. The process starts with a load calculation to confirm the panel has capacity, then we run the circuit and install the correct outlet for the appliance. Where a panel upgrade is needed to support the new circuit, we handle that in the same visit or schedule it as the first step.
For properties with air conditioning or heating equipment, we handle the electrical supply side: the dedicated circuit, the disconnect, and any panel work needed to carry the load. The equipment itself is outside our scope.
Call and we'll get the current flowing right.
El Dorado Hills sits in the Sierra Nevada foothills, where hot, dry summers, wildfire-season power disruptions, and a growing number of EV owners and solar adopters shape what electrical work comes up most often. The three services below address that directly.
EV adoption in El Dorado Hills and the surrounding El Dorado County communities has grown steadily, and a Level 2 home charger is the practical solution for daily charging. The job involves running a dedicated circuit from the panel to the garage or carport, confirming the panel has the amperage to support it, and installing the outlet or hardwired connection the charger requires. Panel capacity is confirmed before any wiring begins, so the scope is clear before work starts. If the panel needs an upgrade to support the charger, we scope that as part of the same conversation.
Rooftop solar is common in the foothills, and battery storage systems have become a practical response to wildfire-season public-safety power shutoffs. Our role is the electrical side: the circuits, the interconnection wiring, and the panel capacity that a battery storage system needs to function. We do not install the solar panels or the storage unit itself, but we handle the wiring that ties the system into your home's electrical service and confirm the panel is prepared for the added load. Getting that wiring right is what determines whether the system performs as the installer designed it to.
Grid instability during utility switching events and wildfire-season shutoffs can send voltage spikes through the service entrance that damage electronics, appliances, and HVAC equipment. A panel-mounted surge protection device catches those spikes before they reach the downstream circuits. The installation involves mounting the device at the panel, connecting it to the grounding system, and verifying the bonding is correct. Electrical work done to the standard the next inspection expects is what we aim for on every job, and surge protection installation is no exception.
Every home's wiring tells a different story, and an inspection is how you find out what that story is before it becomes an emergency. We conduct electrical safety inspections for homebuyers, sellers, landlords, and property managers. A pre-purchase inspection surfaces wiring conditions, panel issues, and missing safety devices that a general home inspector may not catch. A pre-sale inspection gives a seller the chance to address problems before they appear on a buyer's report.
Working here means getting the diagnosis right before the work starts. That applies to inspections as much as it does to repairs: we look at the panel, the branch circuits, the outlets, and the grounding, and we document what we find before recommending any work.
Rental property inspections follow the same process. Landlords in El Dorado County dealing with code compliance questions or preparing a unit for a new tenant can schedule an inspection to confirm the property's electrical system is in order. Where an inspection turns up missing AFCI or GFCI protection, we can install the correct breakers or outlets as a follow-through step. Hardwired smoke detector and carbon monoxide detector installation falls in this category as well.
Wildfire-season grid events in the foothills are not a hypothetical. A backup generator that is properly connected to the home's panel through a transfer switch is the difference between a usable home and one that is dark for the duration of an outage. We handle the electrical side of that connection: the transfer switch installation, the panel connection, and the load management that determines which circuits the generator will carry.
The generator itself - the engine, the fuel system, the maintenance schedule - is outside our scope. What we handle is the wiring that makes it work with your home. That means installing the transfer switch at the panel, running the connection to the generator inlet, and confirming the circuits are balanced for the generator's rated output. If you are asking about generator hookup cost, the rate is confirmed on the call once we know the scope.
Pricing for electrical work depends on the job: what circuit it involves, what the panel can support, and how much access the wiring requires. We confirm the rate on the call before anything is scheduled, so you know what you are agreeing to before we show up.
The call covers the scope, the price, and what the visit will involve. If the job turns out to be more involved once we are on site, we explain why before the work changes. There are no commitments made until you have the information you need.
Electrical work to code. Clean panel work. Costs set out on the call.
We serve El Dorado Hills and the surrounding communities throughout El Dorado County and the greater Sacramento foothill area, including:
If you are outside this list but in the area, call and we will confirm whether we can get to you.
An inspection makes sense before buying or selling a home, when a rental property is being prepared for a new tenant, when a home has older wiring that has not been looked at recently, or when a general home inspector flags an electrical concern. A pre-purchase inspection in particular can surface panel issues, missing GFCI or AFCI protection, and wiring conditions that a non-specialist may not catch.
A panel that trips breakers under normal use, a fuse box that has not been replaced, circuits that cannot support an EV charger or additional appliance load, and a 100-amp service in a home that draws more than it can handle are all signs worth evaluating. We run a load calculation before any upgrade so the new panel is sized for what the home actually needs.
A burning smell from an outlet or panel, sparking at a receptacle or switch, a breaker that trips immediately on reset and will not hold, or a situation where part of the home has lost power and the cause is not clear are all conditions that should not wait.
Call (530) 461-5942 and describe what you are seeing so we can assess the urgency.
Do not repeatedly reset a breaker that keeps tripping, and do not use an outlet that is sparking, warm, or discolored. If the smell is strong or the panel is making noise, the safest step is to turn off the main breaker and wait. Leave the affected area accessible and note what you observed before calling so we can scope the job accurately.
A Level 2 EV charger requires a dedicated 240-volt circuit run from the panel to the garage or parking area. Before the circuit is run, we check the panel's available capacity to confirm it can carry the added load. If the panel is already near its limit, a service upgrade is the right first step, and we scope that as part of the same conversation.
A panel-mounted surge protection device catches voltage spikes at the service entrance before they reach the downstream circuits and connected equipment. In El Dorado Hills, grid fluctuations during high-demand summer periods and the abrupt power restoration that follows a wildfire-related shutoff are both common sources of damaging surges. The device is installed at the panel and connected to the grounding system, and the protection is immediate once the installation is complete.
Generator hookup involves installing a transfer switch at the panel, running the connection to the generator inlet, and confirming the circuits are balanced for the generator's rated output. The transfer switch is what allows the generator to carry selected circuits without backfeeding the grid. We handle the wiring and the panel connection. The generator itself, including fuel and maintenance, is outside our scope.
A panel inspection covers the breaker condition, the wiring connections at the bus bars, the presence of double-tapped breakers, the grounding and bonding, and whether the panel has the capacity to support the home's current and planned loads. If arc-fault or ground-fault breakers are missing where the code requires them, we note that as part of the findings.
We handle the electrical side of the connection: the circuits, the interconnection wiring, and the panel capacity assessment that a battery storage system requires. A load calculation confirms whether the current panel can support the system or whether a service upgrade is needed first. The solar panels and the storage unit itself are installed by the solar contractor. Our role is the wiring that ties the system into the home's electrical service.
A repair is the right call when the fault is isolated: a failed GFCI outlet, a bad breaker, a loose connection at a switch. When the fault is a symptom of a larger condition, such as aluminum branch-circuit wiring, an undersized panel, or a grounding system that was never installed correctly, a repair that does not address the underlying issue will not hold. We explain which situation applies after the diagnostic.
We are open seven days a week, 7:30 AM to 8:30 PM. Whether the job is a tripped breaker, a panel upgrade, an EV charger circuit, or a full rewire, the first step is the same.
Call (530) 461-5942 to get a quote.
We will scope the job on the call, give you the rate, and get the work scheduled.
We handle electrical work across the board, from a single dead outlet to a full panel replacement or new circuit for an EV charger. The table below breaks down what each service covers, who it fits best, and a practical note to help you decide what to ask about when you call. Pricing is confirmed on the call before anything is scheduled.
| Service | What It Covers | When You Need It | Good to Know |
|---|---|---|---|
| Hot-Tub Circuits |
| Homeowners installing a new hot tub or replacing an existing one | Hot-tub wiring requires a GFCI-protected disconnect within sight of the unit and a dedicated circuit sized to the manufacturer's specifications. |
| Electrical Panel & Service UpgradesMost Popular |
| Homes with an undersized panel, a fuse box, or plans to add EV charging or battery storage | A load calculation before the upgrade confirms the new panel is sized for what the home actually draws, not just the minimum code allows. |
| Lighting Installation |
| Homeowners upgrading indoor fixtures or adding outdoor security lighting | In the El Dorado Hills foothills, exterior lighting on longer driveways and around outbuildings is both practical and commonly requested. |
| Dedicated Appliance Circuits |
| Homes adding a new appliance or experiencing repeated trips on a shared circuit | High-draw appliances each require their own breaker and circuit. Running them on a shared circuit is the most common cause of repeated kitchen and laundry breaker trips. |
| Ceiling Fan Installation |
| Any room where a fan is being added or swapped out | A standard junction box is not rated for a ceiling fan's weight and movement. We confirm the correct support is in place before the fan goes up. |
| EV Charger Installation |
| EV owners who want reliable home charging rather than a standard wall outlet | We check panel capacity before running the circuit. If the panel needs an upgrade to support the charger, we scope that as part of the same conversation. |
| Electrical Repairs & Troubleshooting |
| Any homeowner or tenant with an unexplained electrical fault | We trace the fault to its source before recommending any repair, so you know exactly what the fix involves. |
| Wiring & Circuit Installation |
| Older homes with aging wiring or any property adding new circuits | Aluminum branch-circuit wiring from the 1960s and 1970s requires specific remediation methods, not a standard repair. We assess the wiring type before recommending an approach. |
| Electrical Safety Inspections |
| Homebuyers, sellers, and landlords preparing a property for occupancy or sale | A pre-purchase inspection can surface panel issues and missing safety devices that a general home inspector may not catch. |
| Outlet & Switch Installation |
| Kitchens, bathrooms, garages, and outdoor areas requiring code-required protection | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor locations. Missing protection is a common finding on older properties. |
| Whole-Home Surge Protection |
| Homes with sensitive electronics or properties in areas prone to grid switching events | In El Dorado Hills, voltage spikes from wildfire-season shutoffs and abrupt power restoration are a real and recurring source of appliance and electronics damage. |
| Solar & Battery Backup |
| Homeowners adding battery backup in response to wildfire-season power shutoffs | We handle the electrical side only: the wiring, interconnection, and panel work. The panels and storage unit are installed by the solar contractor. |
| Standby Battery for Outages |
| Homeowners who want selected circuits to stay live during a grid outage | The transfer switch is what prevents backfeed to the grid and allows the generator or battery to carry selected circuits safely. We handle the wiring and panel connection. |
| Breaker & Fuse Repair |
| Homes where a single circuit keeps failing or a fuse blows repeatedly | A breaker that trips immediately on reset often points to a wiring fault, not just a worn breaker. We check both before replacing anything. |
What causes breakers to trip repeatedly?
A breaker that trips under normal use is usually telling you one of three things: the circuit is overloaded because too many devices share it, a single appliance is drawing more than the circuit was sized for, or there is a wiring fault somewhere on the circuit. We trace the cause before recommending a fix, because replacing a breaker that is doing its job correctly does not solve the underlying problem.
Is the electrical work permitted and inspected?
Local permit rules decide which electrical jobs need an inspection. Panel upgrades, service changes, new circuit runs, and EV charger installations typically require a permit and a follow-up inspection in most jurisdictions. We confirm what applies to your job before the work starts, and the work is done to the standard the next inspection expects.
How do I know if my home's wiring needs to be replaced rather than repaired?
A repair is the right call when the fault is isolated to a single device or connection. When the fault is a symptom of a larger condition, such as aluminum branch-circuit wiring, knob-and-tube wiring throughout the home, or a grounding system that was never installed correctly, a repair that does not address the root cause will not hold. We explain which situation applies after we have seen the wiring.
Faults Traced Before Anything Is Replaced
We identify the cause of an electrical fault before recommending a repair. Replacing a device that is not the source of the problem does not fix the problem, and we do not bill for work that does not address what you called about.
What do flickering or dimming lights usually mean?
Lights that flicker when a large appliance starts up, such as a refrigerator or air handler, usually point to a voltage drop on a shared or undersized circuit. Lights that flicker without any obvious trigger can indicate a loose connection at the fixture, at a junction box, or at the panel. Either way, the symptom is worth investigating rather than ignoring, because a loose connection that causes flickering can also generate heat at the connection point.
Why would an outlet or switch stop working?
A dead outlet is often a tripped GFCI somewhere upstream that has cut power to a chain of receptacles. It can also be a failed device, a loose wire at the back of the outlet, or a wiring fault on the circuit. A switch that stops working is usually a failed device or a loose connection, though a buzzing or warm switch points to a load the dimmer or switch was not rated for. We identify the cause before replacing anything.
Is a warm or buzzing outlet a safety concern?
Yes. A warm outlet or one that buzzes under load is not normal and should not be ignored. Heat at an outlet can come from a loose connection, a failing device, or a circuit that is carrying more than it was designed for. Any of those conditions can worsen over time. Call and describe what you are noticing so we can assess how urgent the visit needs to be.
Code-Compliant Work on Every Job
Panel upgrades, new circuits, and wiring work are done to the standard the next inspection expects. We confirm permit requirements before the work starts and do not cut corners that a code inspector will find later.
Do I need to be home for the electrical work?
For most jobs, yes. We need access to the panel, the affected circuits, and the areas where work is being done. If you have a property manager or someone else who can provide access and answer questions about the property, that can work as well. We confirm the access requirements on the call when we scope the job.
How do estimates and pricing work for electrical jobs?
Pricing depends on the job: what circuit it involves, what the panel can support, and how much access the wiring requires. We confirm the rate on the call before anything is scheduled, so you know what you are agreeing to before we arrive. If the job turns out to be more involved once we are on site, we explain why before the scope changes.
Scope Agreed Before the Panel Is Opened
The job is scoped and the rate is confirmed on the call before we schedule anything. You know what the visit covers and what it costs before we arrive.
When should I call an electrician instead of trying a DIY fix?
Replacing a light fixture or a standard outlet is within reach for a careful homeowner in some situations, but anything involving the panel, new circuit runs, GFCI or AFCI breaker installation, or a fault you cannot clearly identify is worth a call. Electrical faults that are misdiagnosed tend to come back, and work done inside the panel without the right knowledge creates conditions that a code inspection will flag. A call to scope the job costs nothing and tells you what you are actually dealing with.
How are emergency electrical calls handled?
We are open seven days a week, 7:30 AM to 8:30 PM. If you are dealing with a sparking outlet, a burning smell from the panel, a breaker that will not hold, or a situation where part of the home has lost power and the cause is not clear, call us and describe what you are seeing. We assess the urgency on the call and get the visit scheduled as quickly as the situation calls for.
Can you add circuits for a workshop or garage?
Yes. A workshop or garage with power tools, compressors, or welding equipment often needs dedicated circuits sized for the equipment's draw rather than a shared general-purpose circuit. We start with a load calculation to confirm the panel has capacity, then run the circuits and install the correct outlets for the equipment. If the panel needs more room to support the added load, we scope that as part of the same conversation.
Call (530) 461-5942 to describe the job and get a straight answer about what it involves and what it will cost.
(530) 461-5942